• Voltage output signal: 100 or 500 mV/ g
• Frequency response:
0.5 to 14 000 Hz (100 mV/ g versions)
0.2 to 3 700 Hz (500 mV/ g versions)
• Temperature range:
−55 to 120 °C (100 mV/ g versions)
−55 to 90 °C (500 mV/ g versions)
• Isolated electronics with internal shield for reduced noise and improved bias-voltage stability
• Ground isolated from case
• Available as a sensor only or with an integral cable
• Available in standard versions and Ex versions certified for use in hazardous areas
EPRO PR6424/003-030 16mm Eddy Current Sensor, Sleeve Thread M18x1.5, Without Armored Cable, Total Sensor Length is 82.5mm, With Adaptor Plug, Total Cable Length is 8m, Lemo Cable End.
TRICONEX 4000212-002 TRIDENT EXTENDER. The Trident supports a range of modules for applications with low point counts and distributed I/O. This section provides detailed specifications for each product in the Trident family
The basic unit 07KT98 works either as
• bus master in the decentralized automation system Advant Controller 31 or as
• slave (remote processor) in the decentralized automation system Advant Controller 31 or as
• stand-alone basic unit.
The basic unit is powered by 24 V DC.
• Non-contact measurement system based on eddy-current principle
• Ex certified versions for use in hazardous areas (potentially explosive atmospheres)
• Conforms to API 670 recommendations
• 1, 5 and 10 m systems
• Temperature-compensated design
• Voltage or current output with protection against short circuits
• Frequency response: DC to 20 kHz (−3 dB)
• Measurement range: 2 or 4 mm
• Temperature range: −40 to +180 °C