Siemens SGTx-4000F

High performance sensors and monitoring systems
After decades working with the world’s turbine manufacturers and power plant integrators, Meggitt has developed one of the widest and most comprehensive ranges of sensors for extreme environments from the Vibro-Meter® line, including cabling, electronics and associated accessories. Our VM600, Vibrosmart ® and Vibrosight ® hardware and software solutions can monitor virtually every parameter with the extreme environment sensors necessary to provide detailed information on equipment condition.

The Meggitt Vibro-Meter ® sensors highlighted on the generic turbine below are standard fit on the Siemens SGTx-4000F gas turbine. To learn more about these sensors and the full range of sensors and systems, please visit the Colletplc.com website.

Gas turbine monitoring
Siemens SGTx-4000F

Dynamic pressure measurement chain
•Dynamic pressure sensor CP 532 (3 or 5) P/N: 143-532-000-011
•Extension cable EC 153 (3 or 5) P/N: 922-153-000-202
•Signal conditioner IPC 704 

P/N: 244-704-000-511-A3-B07-C90-D5-E2-F20.000-G2-H0-I0 UU = SI Unit (3 or 5) 

P/N: 244-704-000-511-A3-B09-C6,20-D345-E2-F20.000-G2-H0-I0 UU = US unit (3 or 5)
•Industrial housing ABA 172 (1) P/N: 830-172-000-01x-A1-C06-T00
•Industrial housing ABA 171 (0 or 1) P/N: 830-171-000-011-A1-C04-T00
•Galvanic separation GSI 127 (3 or 5) P/N: 244-127-000-01x-A1-B2 

Quantity : 3 or 5 depending on the Monitoring System combustion Dynamics 

Casing vibration and relative shaft vibration monitoring
•Piezoelectric accelerometer CA 202 P/N: 144-202-000-105
•Signal conditioner IPC 704 (x 4) 

P/N: 244-704-000-042-A3-B03-C100-D77-E5-F5000-G2-H0-I0 UU = SI 

P/N: 244-704-000-042-A3-B05-C100-D1541-E5-F5000-G2-H0-I0 UU = US
•Industrial housing ABA 171 (x1) P/N: 830-171-000-011-A1-B00-C02-D02-E00-F00-G00-H00-I00-J00-T00
•Temperature barrier MA 133 (x 2) P/N: 809-133-000-011 Sensors for phase reference
•Proximity probe TQ 402 (x1) P/N: 111-402-000-01X-A3-B1-C072-D000-E100-F2-G098-H10
•Cable feed-through SG 102 (x1) P/N: 800-102-000-011-A01
•Signal conditioner IQS 450 (x1) P/N: 204-450-000-00X-A3-B23-H10-I1
•Industrial housing ABA 172 (x1) P/N: 830-172-000-01x-A1-B00-C04-D02-E02-F00-G00-H00-I00-J00-T00

Sensors for humming measurement
•Piezoelectric sensor CA 901 (x3) P/N: 144-901-000-621
•Cable assembly EC 153 (x3) P/N: 922-153-000-202
•Signal conditioner IPC 704 (x3) P/N: 244-704-000-042-A3-B01-C10-D50-E2-F10000-G2-H0-I0
•Industrial housing ABA 172 (x1) P/N: 830-172-000-01x-A1-B00-C06-D00-E00-F00-G00-H00-I00-J00-T00 

Sensors and signal transmitter for hydraulic clearance optimisation HCO-measurement
•Proximity sensor WW 018 (x2) P/N: WW018-M24x1, 5-200-5, 0-MS
•Signal transmitter TWW 103 M1 (x2) P/N: VMD-TWW 103-M1 Sensors for WSrel-monitoring GT
•Proximity probe TQ 402 (x4) P/N: 111-402-000-01X-A3-B1-C072-D000-E100-F2-G098-H10
•Signal conditioner IQS 450 (x4) P/N: 204-450-000-00X-A3-B23-H10-I1
•Cable feed-through SG 102 (x4) P/N: 800-102-000-011-A01

•VM600 System
•ABE 042 (x1) P/N: 204-042-100-01X

ABE 042 (x1)  P/N: 204-042-100-01X
•RPS 6U (x2) P/N: 200-582-200-013

RPS 6U (x2)  P/N: 200-582-200-013
•MPC-4 (x3) P/N: 200-510-SSS-1Hh

MPC-4 (x6)  P/N: 200-510-SSS-1Hh
•MPC-4 (SIL Version) (x2) P/N: 200-510-SSS-1Hh

IOC-4 T(x6)  P/N: 200-560-SSS-1Hh
•IOC-4 T(x5) P/N: 200-560-SSS-1Hh
•RLC 16 (x2) P/N: 200-570-000-1Hh
•Galvanic separation GSI127 (x3) P/N: 244-127-000-01X-A1-B02

The TQ series of proximity sensors are rugged sensors that use the eddy-current principle in order to allow the contactless measurement of relative vibration, position and other measurements in harsh environments.
TQ-based solutions enable comprehensive measurements including radial vibration, axial position, rotational speed and phase reference (1/REV pulse)

A TQ-based measurement chain consists of a proximity sensor, an optional extension cable and an IQS signal conditioner, configured for the particular application. The signal conditioner is required to perform all required signal processing and provide a current or voltage signal suitable for transmission to the monitoring system.
TQ-based measurement chains are ideally suited to the measurement and monitoring of relative vibration and axial position for rotating machine shafts, such as those found in steam, gas and hydraulic turbines, as well as in generators, turbo-compressors and pumps.They can also measure rotational speed and/or provide phase reference (1/REV pulse) signals.

KEY FEATURES
• Available in standard versions and in Ex versions certified internationally for use in hazardous areas
• Broad family of sensors with different measurement ranges (sensitivities), mounting options (standard, reverse or right-angle) and pressure capabilities (up to 100 bar)
• Suitable for safety-related applications such as IEC 61508 SIL 2 or ISO 13849 PL c Cat 1 certified measurement chains
• Conforms to API 670 5th edition