IOCN Vibration 200-566-000-112 input/output card-Colletplc

The CPU M is a modular Central Processing Unit (CPU) card intended for use in Vibro-Meter's VM600 series of Machinery Protection System (MPS) and Condition Monitoring System (CMS) racks. Depending on the system requirements, the CPUM may be used alone in the rack (installed in the front card cage) or in conjunction with the corresponding IOC N Input / Output Card (installed in slot 0 of the rear card cage, directly behind the CPU M).

The modular, highly versatile design of the CPU M means that all rack configuration, display and communications interfacing can be performed from a single card.

The CPU M consists of a base carrier card having two PC/104 type slots. One of a range of PC/104 modules can be installed in each slot. In the standard configuration, a single PC/104 type CPU module is fitted. This provides an RS-232 connection via a DB9 connector, and an Ethernet network connection via an RJ45 connector on the front panel, or alternatively, via the relevant ports on the IOC N, if installed.

The IOC N is a network communications card which includes two pairs of RJ11 connectors (labelled A and B) for configuring multi-drop RS-485 networks of VM600 racks, and another RJ45 connector for a redundant Ethernet connection. These extra connectors may be used if the optional Ethernet and RS-485 (RS-422) PC/104 modules have been installed on the CPU M.

The CPU M front panel features an LCD display that shows the level of a selected monitored output in bar-graph and digital form. The Alert and Danger levels are indicated on the bar-graph. The signal identification (slot and output number) is shown at the top of the display. The SLOT and OUT (output) keys on the front panel are used to select which signal to display.

Coloured LEDs on the front panel indicate the OK, Alert (A) and Danger (D) status for the currently selected signal (these are coloured green, yellow and red, respectively). When Slot 0 is selected, the LEDs indicate the status of the whole rack. When the CPU M card is functioning correctly, the green DIAG(diagnostic) LED is lit.

An ALARM RESET button on the front panel resets all latched alarms (and associated relays) for the entire rack.

Communication interfaces – Ethernet
Number : 2
Primary Ethernet interface
• Network interface : 10/100BASE-TX – Ethernet / Fast Ethernet
• Data transfer rate : Up to 100 Mbps
• Distance between devices : Up to 100 m
• Protocols : Meggitt TCP/IP proprietary protocol for communication with the VM600 MPSx software, Modbus TCP and/or PROFINET
• Function : VM600 rack configuration and communications using the VM600 MPSx software, fieldbus Modbus TCP communications and/or fieldbus PROFINET communications
• Connectors : NET on CPUM card or 1 on IOCN card (see Connectors on page 10) Secondary Ethernet interface (requires IOCN card)
• Network interface : 10/100BASE-TX – Ethernet / Fast Ethernet
• Data transfer rate : Up to 10 Mbps
• Distance between devices : Up to 100 m
• Protocols : Modbus TCP
• Function : Fieldbus Modbus TCP communications
• Connector : 2 on IOCN car

Order Number:

IOCN 200-566-000-114
IOCN 200-566-000-113
IOCN 200-566-000-012

Datasheet Link:

IOCN Vibration 200-566-000-112 input/output card Manual PDF Datasheet