IS200EDISG1AAA GE Ex2100e Exciter Power Distribution Board

Description:

The IS200EDISG1AAA board is a power distribution board, part of the EX100e series. EDIS enables seamless interconnection between the main control processor board, I/O boards, and modules via high-speed serial link (HSS) communication. This module can simultaneously receive both DC and AC power when distributing and receiving power. By receiving these power supplies, the board can control system hardware. The resulting power will then power other I/O boards, controllers, and bridge rectifier boards.

A key feature of the IS200EDISG1AAA is its versatility for various redundancy applications. Typical redundancy applications for Mark VI series modules are triple redundancy, as the primary architecture of the Mark VI system is triple-module redundancy. This module can be used in combinations of simplex, duplex, and triple redundancy modes.

Features:

• Power Distribution

Distributes the input DC voltage to multiple loads.

• Overcurrent Protection

Prevents damage to loads caused by excessive current.

• Overvoltage Protection

Prevents damage to loads caused by excessive voltage.

• Short-Circuit Protection

Prevents damage resulting from short-circuit faults.

• Isolation Protection

Provides electrical isolation to enhance system safety.

• Communication Capabilities

May support various communication protocols (e.g., Modbus RTU, DNP3) to enable remote monitoring and control.

Specifications
Part Number: IS200EDISG1A
Series Name: EX2100e
Board Type: Exciter Control Power DistributionDC 
Input Voltage: 125VDC
AC Input Voltage: 115/220VAC (50/60Hz)
AC Inputs: 2
Auxiliary Supply Voltage: 28VDC
Operating temperature: -30°C to +65°C (depending on some documentation)
Protection rating: IP20
Number of switches: 5 bridge switches, 5 power switches
Number of connectors: 52 female sockets (including 5 9-pin connectors)
Redundancy modes: Supports single, dual, and triple redundancy

Frequently Asked Questions:

1.What is the IS200EDISG1AAA?
It is the EX2100e series exciter switchboard developed by General Electric (GE).
2.What is the function of the IS200EDISG1A model?
The IS200EDISG1A model is used to connect customers' AC and DC control power supplies to system hardware.
3.Which systems are compatible with this exciter switchboard?
This EDIS is compatible with the EX210 system and other distributed control systems (DCS) that use the Ethernet Modbus forwarding protocol.
4.What types of power supplies does this EDIS accept?
The EDIS accepts both DC and AC power supplies during power distribution and reception. This flexibility allows the board to effectively control system hardware.

Datasheet Link:

IS200EDISG1AAA GE Ex2100e Exciter Power Distribution Board PDF Datasheet