+8618060982349

IS200EMIOH1A GE EX2100 MAIN I/O CARD

IS200EMIOH1A is an Exciter Main I/O Board manufactured by General Electric under EX2100 Series

Item NO.:
IS200EMIOH1A
Payment:
T/T
Market Price:
$4500
Product Origin:
U.S.A.
Color:
Depends on material
Shipping Port:
Xiamen
Lead Time:
5-7 days
Goods Stock:
2
Product weight:
0.4 kg

Inquiry now

product introduction

Manufacture	GE
Model	IS200EMIOH1A
PN No.	IS200EMIOH1A
Catalog	EX2100
Description	MAIN I/O CARD
Origin	USA
HS CODE	85389091
Dimension	33108 (CM)
Weight	0.4 kg

Description:

IS200EMIOH1A is an Exciter Main I/O Board manufactured by General Electric under EX2100 Series. It is a single-slot, double-height VME style board that is installed in the control rack. The EPCT, ECTB, EACF, and EXTB terminal boards' I/O is handled by EMIO. PT and CT signals are included in the I/O. Contact inputs, output relay drivers, and pilot trip relay drives are all available. It also sends logic level gate pulse signals to the ESEL board, which sends them to EGPA in the power conversion cabinet via the backplane. EMIO manages inputs and outputs from a variety of I/O boards connected to the control rack.

IS200EMIOH1A Board Replacement (Offline)

Ensure that the exciter has been deactivated.
Open the control cabinet door and check any electrical circuits for power before touching them.
Remove the EMIO board from the control rack with care as follows:
Loosen the screws near the ejector tabs at the top and bottom of the faceplate. (The screws in the faceplate are captive and should not be removed.)
Remove the module by lifting the ejector tabs.
Gently pull it from the rack with both hands.
Insert the replacement EMIO board into the appropriate rack slot.
Begin seating the board by firmly pressing the top and bottom of the faceplate with your thumbs at the same time.
Tighten the screws at the top and bottom of the faceplate to finish seating the board in the slot. To ensure that the module is seated squarely, tighten the screws evenly.

When controlling the inputs and outputs of other terminal boards, the IS200EMIOH1A will control contact inputs, pilot trip relay drivers, PT and CT signals, and output relay drivers. As the EMIO board connects to the EXTB board the EMIO board will initiate de-excitation, which means that the EMIO board also controls the EDEX board that the EXTB is connected to.

When using the IS200EMIOH1A board the best manual to use is the GEI-100453 IS200EMIO Exciter Main I/O Board manual, but as that manual is difficult to find, the GEH-6632 EX2100 Excitation Control User’s Guide has information related to the EMIO board on page forty-eight.

Frequently Asked Questions:

1.The IS200EMIOH1A board controls field flashing relays. Which field flashing relays does the IS200EMIOH1A board control and how?
The IS200EMIOH1A board controls the 53A and 53A field flashing relays, this function is done so through the drivers on the EMIO board.

2.What parts of the EBKP Backplane is the IS200EMIOH1A model connected to?
The IS200EMIOH1A board is connected to Section C as well as the M1 and M2 Controllers.

Datasheet Link:

IS200EMIOH1A GE EX2100 MAIN I/O CARD PDF Datasheet