Siemens provides SINAMICS S210 with new servo motor to expand its application field • The simotics S-1FS2 has a stainless steel shell to meet the special needs of the pharmaceutical and food and beverage industries • Simotics S-1FK2 servo planetary reducer motor realizes the best matching of speed, torque and inertia • Simotics S-1FT2 servo motor has IP67 protection level, 26 bit encoder, higher r...

All the instrumentation and control systems used in the power station should be accurately connected to the ground. "Ground" is a common reference point site, which is defined by different names when applied in different situations. In the design of TSI cabinets, there are protective ground and signal ground to avoid noise interference. A correct grounding system can effectively suppress external ...

A steam turbine is a rotary power machine that converts steam energy into mechanical work. It is also called a steam turbine. It is mainly used as a prime mover for power generation. It can also directly drive various pumps, fans, compressors and ship propellers. The safe and stable operation of a steam turbine unit is related to steam balance and energy conservation and environmental protection, ...

Bently Nevada Vibration and Acceleration Module 3500/42 (128229-01, 176449-02) The bently nevada 3500/42M displacement/velocity acceleration monitor can accept 1 to 4 displacement, velocity or acceleration sensor signals. It is a 4-channel monitor that can accept signals from displacement, velocity, and acceleration sensors. By processing these signals, it can complete a variety of vibration and p...

6. 3500/40M Displacement Monitor The 3500/40M Proximitor is a 4-channel displacement monitor that receives input from Bentley Nevada displacement sensors. It processes the signals to generate various vibration and displacement measurements and compares the processed signals with user-programmable alarm setpoints. Each channel of the 3500/40M can be configured using the 3500 frame configuration sof...

9. 3500/50 Tachometer Module The 3500/50 tachometer module is a two-channel module that receives signals from eddy current sensors or magnetic sensors (unless otherwise noted) to determine shaft speed, rotor acceleration, or rotor direction. It compares these measurements to user-programmable alarm points and issues an alarm when the alarm point is exceeded. The 3500/50 tachometer module can be pr...

12.3500/92 Communication Gateway The 3500/92 Communication Gateway module provides extensive communication capabilities of all rack monitored values and statuses for integration with process control and other automation systems using both Ethernet TCP/IP and serial (RS232/RS422/RS485) communications capabilities. It also permits Ethernet communications with 3500 Rack Configuration Software and Dat...

In the majority of supercritical and subcritical units at turbine manufacturing plants, relative vibration measurements are utilized for unit protection. The standard protection strategy employs a set of orthogonal shaft vibration probes mounted on a single bearing; a protective shutdown is triggered whenever the reading from any one of these probes reaches the designated trip value. However, an i...

Bently Nevada 3500 Series Online Monitoring and Protection System. This monitoring and protection system provides continuous online condition monitoring and protection for your equipment. The Bently 3500 system is compatible with Bently vibration sensor probes and accepts Bently proximity eddy current sensors, velocity and acceleration sensors (such as the 330400 and 330500), and various composite...